Common Questions

🛹 What board do I have, demos, differences in models, water, and more!

🔄 I Need Replacement Belts for My Board

Need a fresh set of belts for your Evolve board? You’re in the right place. We stock high-performance Gates GT3 belts, designed in collaboration with Gates UK for superior strength, smooth power delivery, and quiet performance. They even wear in over

Can I use my phone to control board

Great question. The answer is no, however, you can use your phone to connect to your board to update firmware, change custom speed modes and more. As we're unable to verify every owner's phone quality or chipset, we will never introduce the ability t

🥾 Renegade Bindings – Everything You Need to Know

We’ve had a few people reach out asking about ‘foot straps’ for the Renegade. Just to clarify: we call them Renegade Bindings — is that what you were referring to?. 👉 Grab your Renegade Bindings here. These come as a complete set, including:. Toe st

Can You Charge Your Evolve Board Overnight?

The charger has an automatic cut-off when the board is fully charged, however, we recommend unplugging it as soon as it's charged as a precaution.

10 Things to Consider When Buying an Electric Skateboard

Our top tips on what to look for in an electric skateboard!

How can I find out what board I have? (Our Evolution)

Over a decade in the making and this is what we have to show for it! See our boards from 2010 to present day!

Why Does My GTR V1 Have Harsh, All-or-Nothing Braking?

If your GTR Series 1 board is braking too aggressively — as in, it’s either full brake or nothing — you’re not alone. This can be caused by a few different things, and we’ll walk you through what to check before considering a replacement part. Before

R2 Trigger Reset Written Instructions (GT)

Click here for detailed instructions on how to perform a trigger reset for the R2 Remote (GT).

One Cell Lower Than the Others? Here’s What That Means

If you’re checking your battery cell data and one cell is reading noticeably lower than the others, this may be a sign that the battery is starting to become unbalanced. Your remote simply displays what the battery’s internal sensors are reporting —

How to Remove the Battery from a Stoke 2 or GTR Bamboo Board

How to Remove the Battery from a Stoke 2 or GTR Bamboo Board. The Stoke 2 electric skateboard uses the same battery and housing system as our GTR Series 2 boards. This means the battery is located inside the bottom-mounted enclosure. To remove the ba

🔋 My Stoke 2 Battery is Reading Very Low Voltage — What Should I Do?

If your Stoke 2 battery is reading something like 1.7V, it’s fallen well below safe voltage levels. This can happen after extended storage without charging. Here’s what you need to know:. Don’t try to charge it — the cells are likely unrecoverable an

Website links

Sub‑section. Item. URL. Shop by Series. Stoke X. https://www.rideevolve.com/products/stoke-x. GTR Bamboo Clear Case Edition. https://www.rideevolve.com/products/gtr-bamboo-clear-case-edition. Diablo Carbon. https://www.rideevolve.com/pages/diablo-car

Missing Belts in Your Street Conversion Kit?

Your Street Conversion Kit should absolutely come with the correct belts included. If you’ve opened your package and noticed the belts are missing, that’s not how it’s meant to be — no additional purchase should be required. We’re really sorry this h

Want to Compare Boards? Here’s the Best Place to Start

If you’re trying to decide which Evolve board is right for you, we’ve got you covered. We’ve created a comprehensive board comparison tool so you can easily view the key specs of each model side-by-side. Whether you care most about top speed, range,

Not Sure Which Wheels to Choose? Start Here

Choosing the right wheels can completely change how your board rides. Whether you want max carving, extra comfort, or serious off-road capability, the right setup makes all the difference. To help you find the best option, we’ve built a Wheel Compari

How to Convert Your Tyres from AT to Off-Road

If you’re looking to convert your current All-Terrain (AT) tyres to Off-Road, here’s the good news — it’s the same type of tyre, just with a different tread pattern. There’s no special process required. You’ll simply follow the same steps you would f

Can I Use a GTR Charger with My GTX Board?

No, the GTR charger is not compatible with the GTX board. Each charger is designed specifically for the voltage and battery type used in its respective model. Using the wrong charger can damage the battery or the internal electronics of the board. If

Board Service Packages

Board Service Packages. At Evolve HQ, we offer three service packages designed to keep your board running at peak performance — so you can focus on the ride, not the maintenance. Whether you’re after a tune-up or a full refresh, we’ve got an option t

Have You Received My Repair or Service Item?

Thanks for checking in — we totally get it, especially if your gear is your daily ride. When you send your board, remote, or any part in for a service or warranty repair, here’s what to expect:. Your courier might confirm that your item has been deli

Can I take my board on a plane? (Travel battery info)

Travelling with Your Board – What You Need to Know About Travel Batteries. If you’re planning to fly with your electric skateboard, it’s essential to understand lithium battery regulations. Most airlines only allow lithium-ion batteries under 160Wh (

🔁 Phaze Stuck in Calibration Loop with Fast Red Flashing Lights? Here’s What to Do

If your Phaze remote connects to your board but gets stuck in the calibration screen — and your board shows rapid red flashing lights — this usually means there’s an issue with the brake trigger sensor. This type of internal fault can prevent the rem

Visiting or Shipping to Evolve HQ?

Our US headquarters is located in Wheat Ridge, Colorado. 📍 Address:. Ride Evolve USA. 11459 W I-70 Frontage Rd N, Suite B. Wheat Ridge, CO 80033. United States. 🕘 Opening Hours. Monday – Friday: 9:00 AM – 4:00 PM. Weekends: Closed. Please note: We

Which Belt Do I Need for My Evolve Skateboard?

Choosing the Right Belt(drive belt) for Your Evolve Skateboard. Selecting the correct belt for your board depends on your wheel and gear setup. Using the wrong belt can affect performance, wear out components faster, or even cause slippage. Here’s ho

How to Change Speed Modes on Your Evolve Remote

Your Evolve remote allows you to switch between different speed modes, giving you control over acceleration, top speed, and efficiency. Adjusting these modes based on your riding conditions can enhance your experience, whether you're cruising, carvin

How do I get the best range and performance out of my battery?

Many external factors can affect the range of your board. Click for more.

How to Store Your Evolve Skateboard Properly

If you need to store your board for long periods, the battery should sit between a 40 and 50% charge and stored in a cool dry environment.

How to Maintain Your Evolve Battery for Longevity

Your battery should always be stored at room temperature. Excessive heat can permanently affect or damage the battery. Click for more.

How to Maintain Your Evolve Board for Peak Performance

If you regularly clean and maintain your electric longboard, it will last a long time and ride at its best. Click for more.

Evolve’s Patented and Patent-Pending Technology

Evolve Skateboards has been proudly innovating the electric skateboard industry since 2012. Click for more.

R2 Bluetooth Trigger Reset Written Instructions (GTR)

Click here for detailed instructions on how to perform a trigger reset for the R2 Bluetooth Remote (GTR).

How to Remove and Replace Pivot Cups on Double Kingpin Trucks

Pivot cups play a crucial role in the performance and feel of your double kingpin trucks. Over time, they may wear down and require replacement. Follow these steps to remove and install new pivot cups properly. For more tips on adjusting your trucks,

How do I operate the board?

Not sure how an eSkate works? Check here for more info.

Can I demo one of your boards?

Yes, you absolutely can!!!

The difference between Carbon and Bamboo

Flexible or stiff? You decide!

The difference between street and all terrain

Choosing your wheel will affect what you feel, your overall ride time and the terrain you can explore.

Riders Over 100kg / 220lbs

The maximum load for the majority of our boards is 100kgs / 220lbs and 120kgs / 265lbs for the Carbon Hadean.

Why don’t the motors stop at the same time?

Motors stopping at different times is normal. The main factor is the resistance from the drivetrain usually caused by different belt tensions.

GTR Board Power Light - flashing or solid?

GTR = always solid or off. GT = always flashing or off. If you are experiencing anything different from the above, it may indicate that there is an issue in the electrics

How to Pair or Sync Your New Evolve Remote

If you've upgraded to a Phaze remote from an R2 Bluetooth or WiFi remote, or you've purchased a replacement, you'll need to pair it with your board before riding. Follow these simple steps to sync your remote. If the remote does not respond correctly

Can I send in my R2 remote for screen replacement or repair?

No, unfotunately we no longer repair R2 remotes

Do I have to wear a helmet?

Safety never takes a holiday 🚫🏝

Where is your Service Centre?

We have a Service Centre based in each distributor's country. We currently do not have any authorised Service Centres outside of these locations. Click for more.

What is Considered Normal Wear and Tear on Street Wheels?

Wear on wheels can vary depending on their durometer, how they are used, and what sort of surfaces they are used on. Click for more.

Are the boards waterproof?

We do not rate any of our boards to be water-resistant but in newer models, we have made every effort we can to protect the electrical components in accidental situations.

Can you ride on the beach?

Riding on the beach has the potential for the sand to get stuck in the components and the corrosion from the saltwater may harm the board.

Do the boards have reverse?

There is no reverse function on our boards. Just turn around and kickpush ;)

Do You Offer Servicing for Evolve Boards?

We appreciate your patience — our service centre is temporarily unavailable and we are not accepting boards for service or repair at this time. Please check back soon or contact us and we'll let you know as soon as we're back up and running.

What Are the Main Components of an Evolve Skateboard?

Every Evolve electric skateboard is built with a combination of high-performance parts designed to work together seamlessly. While different models may have variations in design and materials, most boards share these essential components:. If you're

Are Evolve Bushings Compatible Across All Boards?

Yes! Evolve bushings are compatible with all Evolve electric skateboards, regardless of generation. Whether you have a first-generation board or the latest model, our Performance Bushing Kit will fit perfectly. Bushings play a key role in how your bo

How to win a board

Want to score yourself a brand new Evolve board? Our giveaways are officially back, here’s how to enter:. ✅ Follow @evolveskateboards on Instagram✅ Like our IG posts✅ Drop a comment on our IG✅ Subscribe to our YouTube channel✅ Drop a comment on YouTu

What Happens if You Install the Wrong Firmware on Your Board or Remote?

Installing the wrong firmware is not advised. Before doing any firmware update, make sure you’ve got the latest version of the Explore by Evolve app installed on your phone. Once connected to your board via the Phaze remote, go into the Product Info

Can I send in my Phaze remote for screen replacement or repair?

We don’t sell replacement screens separately for the Phaze remote, but you can send your remote to us for repair. In the Return Authorization Number: You can use your name and surname as a reference. Fill in this form

Which Remote Works with My Board?

Which remote came with my board?. Which boards can be upgraded to use the Phaze Remote that were produced with the R2 remote initially?. Which is available here.

Which boards are compatible with the Force Bash Guard Kit?

Which boards are compatible with the Force Bash Guard Kit?. The Force Bash Guard Kit is designed to protect your board’s motors from hard knocks and rough terrain. Built from 6061 alloy with a matte black finish, it doesn’t just look tough—it is toug

Getting a Heat Warning on Your GTR, Hadean, Stoke… or Using a Phaze Remote on a Series 1?

If you’re seeing a heat warning on your remote shortly after turning the board on, but the motors definitely aren't hot, this usually comes down to incorrect firmware. You will receive this warning if your remote has the incorrect firmware installed.

How to Regrip Your Evolve Board

There’s no quicker way to give your board a fresh new look (and feel) than swapping out the grip tape. Whether you’re restoring an old deck or just want a visual upgrade, regripping your board is simple, if you follow the right steps. To help you nai

Need an MSDS for Shipping?

If you're arranging to ship your electric skateboard or battery and have been asked for an MSDS (Material Safety Data Sheet), we’ve got you covered. To request a copy, please contact our Customer Support team and let us know which board you have. We’

What to do if your board doesn't turn on after storage

If your board has been in storage and won’t turn on, it’s very likely the battery has dropped below its safe operating voltage. This is common with lithium-ion batteries when left unused for long periods, especially 4 to 6 months or more. Lithium-ion

When will it be back in stock?

Stock updates:. We know some of our most popular gear sells out fast. This is when current out of stock items will be back in stock:. Phaze Remotes: this week (16-23 June). If you’re waiting on a pre-order, it won’t be long now. If you have any quest

My wheels are making a clicking sound when riding or turning

Noticing a clicking or ticking noise from your wheels while riding or turning? Don’t stress, this is usually easy to fix and is often related to dry or dirty components. Step 1: Lubricate your wheel bearings. Remove the bearings from your wheels and

My remote won’t connect to my board

If your remote isn’t connecting, there are a few steps to take before riding again. There can be several reasons why it’s happening, so let’s rule out the common ones first. This should always be your first step. Follow the instructions for your spec

Which Motor Controller Do I Need?

The motor controller is the brain of your electric skateboard — interpreting throttle and brake signals from your remote and sending the right amount of power to your motors. Without it, there’s no movement, no braking, and definitely no carving. It

Where Are Evolve Stores Located?

We have one official Evolve flagship store in the United States. You’ll find our full range of boards, accessories, and a dedicated service centre on-site. 🏬 Ride Evolve USA HQ & Retail Store. 11459 W I-70 Frontage Rd N, Suite B. Wheat Ridge, CO 800

Waiting to Hear Back About Your Repair?

We know how important your board or remote is to you, and we appreciate you checking in. If you’ve already sent your item in for service and haven’t heard from us yet, a few things could be at play:. Shipping time: Depending on your location and the

Do you sell parts to turn a regular skateboard into an electric one?

Yes, we sell parts separately, but keep in mind that buying each component individually can get expensive—often adding up to nearly the cost of a complete board. Building your own electric skateboard requires technical knowledge, patience, and time.

WHEN a customer asks about repair process, where to send their board, or what happens after drop-off

Trigger examples: “Where do I send my board for repair?” “What happens after I drop my board off?” “How much does a repair cost?”WHEN a customer asks about repair process, where to send their board, or what happens after drop-offIF the customer is as

Can I Drop My Board Off at the Evolve Store for Service?

Absolutely — you’re welcome to bring your board to Evolve USA HQ for service. 🕘 Opening hours. We’re open Monday to Friday from 9 am to 4 pm. 📍 Location:. 11459 W I-70 Frontage Rd N, Suite B, Wheat Ridge, CO 80033. 🚗 Drop-off info. Feel free to st

Why Can’t I Change Speed Modes on My Remote?

If you’re unable to switch speed modes on your remote, there are a couple of possible causes — and we’ll walk you through what to check first. 1. You Might Need a Trigger Reset. Sometimes the remote’s trigger values may be out of range. This means th

Do You Have a Flight-Friendly Board or Battery Available?

At the moment, we don’t offer a flight-friendly board or battery in our current lineup. The original Stoke was equipped with a 144Wh battery, which met most airline regulations for air travel. However, with the upgrades and increased range of our new

🔋 Why Are My Battery Cells Showing Red? What You Need to Know

🔋 Why Are My Battery Cells Showing Red? What You Need to Know. If you’re seeing red cells on your Phaze remote’s battery data screen, don’t panic — but do pay attention. This guide explains what those red values mean and when it’s time to send your

Why Don’t My Motors Stop at the Same Time?

If you’ve noticed one motor on your board rolling a little longer than the other after throttle release — don’t stress. This is actually quite common and usually nothing to worry about. What causes this?. There are a few variables that can lead to mo

Can I Fit All Terrain Wheels on My Onirique/Stoke?

Short answer: absolutely not. The Onirique and Stoke is built for carving and commuting with precision using street wheels only. It does not support All Terrain (AT) wheels, and neither do the Stoke Series 1, Stoke Series 2, or Stoke X. These boards

Having Trouble with Your BMX Battery?

If your Project BMX battery isn’t turning on, won’t charge, or seems unresponsive, don’t stress. We’ll help you sort it out. In most cases, battery issues on the BMX are due to a low or disconnected battery, but unlike our electric skateboards, there

Seeing “gtr_bms” When Updating Through the App on Your Series 1 GTR?

If you’re using the Explore by Evolve app and notice “gtr_bms” showing up when trying to update your Series 1 GTR, here’s what’s going on. If you’re using an Android device and scanning for Bluetooth without the Explore app, “gtr_bms” might appear un

Want to Be an Evolve Ambassador or Collaborate With Us?

Thanks for reaching out and showing interest in being part of the Evolve community! We love hearing from riders who are passionate about electric skateboarding and keen to share that stoke with others. We get a lot of requests like this, so we’ve cre

Phaze Remote – Bluetooth vs. WiFi

The Phaze Remote is our latest and most advanced handheld controller, designed to give you smooth acceleration, precise braking, and real-time ride data, all in a sleek, intuitive interface. Two Versions, One Purpose. To make sure the Phaze is compat

Do Evolve Remotes Come with a Protective Case?

We often get asked whether Evolve remotes come with a protective case, and the short answer is no. Remotes, including the Phaze remote that ships with our current boards, do not come with a protective case as standard. In the past, for the R2 remote

Can my board have SuperCarve 2 Trucks?

Short answer:. SuperCarve 2 trucks are not compatible with any Series 1 models. This includes:. • GTR Carbon (Series 1). • GTR Bamboo (Series 1). • Stoke Series 1. • Onirique. We do not recommend attempting to modify or force compatibilit

If I buy a tyre, tube and hub – can you assemble it for me?

Absolutely – we’ve got you. While we don’t sell fully preassembled wheel sets online, we’re happy to help you build yours. If you’re ordering a tyre, tube, and hub, just leave a note in your order at checkout asking us to assemble it for you. We’ll g

Why have the prices of your parts gone up?

We get it — price changes aren’t ideal. The truth is, many of our component prices (including motors and remotes) have stayed the same for several years, even as material and manufacturing costs increased behind the scenes. We’ve done our best to abs

Can I Buy Parts for My Phaze or R2 Remote?

If your Phaze or R2 remote has been dropped, cracked, or damaged — we’ve got your back. Whether it’s a shattered screen, broken housing, or a non-responsive trigger, we’ll help get it sorted. Important:. Remotes - Phaze and R2 (both Bluetooth and WiF

Why Won’t My Series 1 GTR or Stoke Connect to the Remote?

If you have a Series 1 GTR or a Series 1 Stoke and notice that the power button is flashing blue when you turn your board on — and your remote will not connect — this usually indicates a motor controller issue. In almost all cases, this is not a prob

Diagnosing a Bamboo GTX Board That Shuts Off Under Load

If your Bamboo GTX board turns on and rides fine with no weight on it, but shuts off as soon as you stand on it, it could point to a deeper battery or power system issue. Even if the motor controller has been replaced, this type of behaviour usually

Remote Issue Quick Guide: Send It In or Troubleshoot?

Remote Issue. Action. Remote will not turn on at all. SEND IT IN (WAF needed). Remote won’t charge / USB-C not working. SEND IT IN (WAF needed). Remote loses power when unplugged from charger. SEND IT IN (WAF needed). Broken screen or cracked LCD. SE

Purchased Relay Hubs But You Have a Hadean or Diablo?

If you’ve bought Relay Hubs but you’re riding a Hadean or Diablo, there’s a good chance you’re facing a compatibility issue. Here’s what to know and how to fix it. Hadean and Diablo boards come with Surge Drive Gears as standard. Relay Hubs are not c

Can I order a board without wheels?

We often get asked if it’s possible to order one of our boards without wheels—whether to save on cost or to use your own. The short answer is no. All Evolve boards are shipped as a complete package, and that includes wheels. There’s no price differen

Can I order different colour wheels when I order a board?

Yes, absolutely. When ordering a board through our website, you can choose your wheel colour, size, and durometer to suit your style and ride preference. For Street Wheels, you’ll find options to select:. Wheel colour. Size (e.g. 97mm or 107mm). Duro

How long will my board battery last before it needs replacing?

Lithium-Ion batteries can last up to 700-1000 cycles, however, capacity will drop over time. Click for more.

Which Remote Does My GT or GTX Board Use?

If you have a GT or GTX board, it originally came with the R2 remote as the standard remote control. Unless you’ve specifically upgraded or replaced it with a newer model like the Phaze remote (WiFi version), your board will still be using the R2. Th

📦 How to Send Your Board to Us for Repair

If your board needs further diagnosis or repair, here’s how to send it in safely and correctly. Start by completing our Work Authorisation & Return Form. Use your full name as the reference. Please pay close attention to the pre-authorised repair sec

📩 How Do I Contact the Tech Team?

If you’re looking to speak with our Tech Team, you’re already on the right track. You can contact us directly by emailing [email protected]. Just let us know what issue you’re experiencing or what question you have, and we’ll make sure it reache

🛠️ Why is My Phaze Remote Stuck in Safe Mode?

If your Phaze remote is stuck in Safe Mode, it’s usually caused by an internal brake trigger issue. This happens when:. The brake trigger magnet has come loose or broken. The remote mistakenly thinks the brake is constantly being pressed. As a result

Which Battery Do I Need for My Stoke Board?

We’ve got you covered with replacement batteries for both Stoke 1 and Stoke 2 boards. 1. Stoke 1 (2019 – Early 2022):. Came with the original travel-friendly 144Wh battery. Usually paired with a R2 remote. If you bought your Stoke before mid-2022, it

How to Update Your Phaze Remote Using the Explore App

Keeping your remote up to date ensures you get the best performance, reliability, and new features as they roll out. This guide walks you through the firmware update process using the Explore by Evolve app. 📺 Watch the full tutorial here: How to Upd

Does Evolve USA offer a discount for military personnel?

Yes — we do!. If you’re an active-duty service member, veteran, or dependent of a U.S. military member, you’re eligible for a $100 discount on your electric skateboard order (skateboards only). It’s our way of saying thanks for your service. 👉 To ap

What service options does Evolve USA offer?

We offer a range of service options at our Evolve USA HQ in Oceanside, California. Whether your board needs a quick check-up or a full tune-up, we’ve got packages to suit. 🔧 Service Packages. We offer three tiers of in-house servicing:. Service Leve

During the Phaze remote reset/calibration process, the remote shuts off

If your Phaze remote powers off during the reset or calibration process, it’s likely due to an internal fault. This is the same issue we see with remotes that get stuck in trigger calibration and don’t progress — the internal mechanism is no longer f

Do you have Oniriques available?

The Onirique is no longer available and is no longer being produced. It was a limited-time collaboration with the crew at Loaded, and while it had a great run, it’s now wrapped up. If you’re after a high-performance shortboard, the Stoke X is the nex

Why is my GTR Series 2 showing 1% battery and vibrating constantly, even after a charge?

If your GTR2 board suddenly shows 1% battery, vibrates constantly, locks into ECO mode, or asks for calibration, even though it was recently charged, this usually points to a battery issue, not a remote or firmware problem. This behaviour is typicall

What kind of lubricant or grease should I use for the bushings of the trucks?

What kind of lubricant or grease should I use?. For maintaining your board’s bushings and truck pivot cups, we recommend using lithium-based grease — the same type we offer in-store. This grease helps:. Reduce squeaking and friction. Improve turning

eBike Rebates & Incentives

Chasing Project BMX savings? Your city or state might offer a rebate or incentive that helps you save big on your new ride. With government subsidies, local council initiatives, and utility provider programs on the rise, there are now more ways than

What is the recommendation for storing your board?

If you’re not riding your board for an extended period, proper storage is key to maintaining its performance and battery health. Following these steps will help keep your board in peak condition, so it’s ready to ride when you are. Related articles:

You you ship to Mexico?

We’re currently unable to ship skateboards to Mexico.

Can I check the battery health on my GTR Series 1?

If you’re using a GTR Series 1 board, it’s not possible to view detailed battery health or individual cell voltage on your remote. This is due to hardware limitations of the board and remote — the system simply doesn’t support that level of feedback.

What do I need to change the trucks on my Stoke X?

Good news — your Stoke X already comes with SuperCarve 2.0 trucks, so if you’re just after a colour change, you’re sorted. You don’t need to change the gears or motor mounts. Trucks: Simply choose the new colour you’d like, and you’re good to go. No

How to switch between V1 and V2 mode on your Phaze Wifi Remote

If you’ve just bought a new Phaze Wifi Remote for your GT or GTX board and it’s not connecting, it may be set to the wrong version. You can manually switch between V1 and V2 mode to match your board’s motor controller. Turn on the remote. Double-pres

Are USB Prism Strip Lights compatible with my GTR Carbon Series 1?

No, USB Prism Strip Lights are not compatible with the GTR Carbon Series 1 but are with the GTR Series 1 Bamboo board. The Series 1 Carbon GTR does not have USB ports, but the Bamboo GTR Series 1 does have, so there’s no way to power the lights direc

Which boards are compatible with Prism Strip Lights?

We have two types of Prism Strip Lights, and compatibility depends on your board model:. These connect via USB and are compatible with:. GTR Bamboo Series 1. Stoke Series 1. These connect via the motor controller (no USB required) and are compatible

Why is my Carbon GT stuck in ECO mode or slowing down after 10mph?

If your Carbon GT drops into ECO mode when accelerating or going over 10mph, this usually points to a battery issue — either weak cells or a faulty pack. The board is likely entering a soft LIMP mode to protect itself. To properly assess what’s going

Can I control my GTR Bamboo board using my phone instead of a remote?

No, you cannot control or ride your board using a phone. While the Explore by Evolve app does let you:. Customise power settings (e.g. acceleration, braking curves). Track your rides and stats. Check battery voltage and diagnostics. You cannot use th

My board powers on and connects, but nothing happens when I hit the throttle

If your board powers on, connects to the remote, and shows full battery, but won’t move when you hit the throttle, the first thing to check is the deadman switch. Hold down the deadman switch (the long button underneath the remote). While holding it,

How to turn off the deadman switch on your remote

The deadman switch is a built-in safety feature that requires the underside button to be held while accelerating. If you’d prefer to turn this off, here’s how to do it:. Double-tap the power button on the remote to enter the menu. Scroll down to ‘Opt

Why did my board switch to Sport mode at 5% battery while using Custom mode?

If you’re riding your board in Custom mode and it suddenly switches to Sport mode at 5% battery, you’re not imagining things — this is expected behaviour due to a firmware limitation. In Custom mode, once the battery drops to 5%, the system will auto

Can I check the battery health or voltage on my GTR Series 1?

Unfortunately, battery health or voltage cannot be checked on the GTR Series 1 due to hardware limitations. The remote for this model does not support advanced battery diagnostics like the later models do. Range monitoring: The most practical way to

Will the CNC Drive Gear 66T work on my GTR Series 1 Bamboo or Carbon?

No, unfortunately, the CNC Drive Gear 66T is not compatible with GTR Series 1 boards — including both Bamboo and Carbon models. Truck compatibility: The CNC 66T gear is specifically designed for SuperCarve 2.0 trucks, which are not found on GTR Serie

Can I reverse or come to a complete stop on a hill with my board?

No Evolve board has a reverse function. They’re designed for forward momentum, with no built-in capability to go backwards. When it comes to stopping on a hill, the board won’t come to a complete stop like a car with a handbrake. The motors will resi

Which Prism Lights Are Compatible With My Board?

Prism Strip LED Lights come in two connection types — USB and E-FOC. Each version fits different models, so it’s important to know what works with your board. These lights plug directly into a USB port. ✅ Compatible with:. GTR Series 1 Bamboo. Stoke

Why is my board showing a solid purple LED when powered on?

If your board powers on and the main LED light shows a solid purple colour, it usually indicates a hardware fault, most commonly on one of these models:. Hadean Bamboo or Carbon. Diablo Bamboo or Carbon. Renegade or Renegade Diablo. Unfortunately, if

What size motor does the GTR come with?

The motor size on the GTR depends on which series you have:. Equipped with 2 x 1500W motors (each). Uses a motor controller specifically tuned for 1500W motors. Equipped with 2 x 3000W motors (each). Delivers more torque and improved hill-climbing. U

Are there any repair locations in NYC?

Yes — if you’re based in New York City, you’re in luck. Last Mile PEV is our trusted repair partner in NYC and can assist with servicing your board. They’re familiar with our entire lineup and can help diagnose and repair most issues. Reach out to us

Can I upgrade my motor to a faster one?

We get it — more speed sounds fun. But when it comes to upgrading motors, things aren’t so simple. Each board is built around a specific motor type, and we don’t offer alternative motors to increase speed or torque for the same board. That means you

Can I convert my Carbon board to a Bamboo deck (or vice versa)?

No — it’s not possible to convert between Carbon and Bamboo decks on any of our boards. While some internal components like the battery cells and motor controller are shared across models, the housing, fitment, and overall design of the Carbon and Ba

What gear size is in the Stoke X?

The Stoke X comes standard with the 38T SuperCarve 2 Street Gear. If you’re looking to tweak performance, you can also fit the 32T SuperCarve 2 Street Gear. This gear will slightly increase your top speed, but most riders find the 38T more than enoug

Phaze Remote: Screen Unresponsive or Blank?

If your Phaze Remote appears completely unresponsive — no display, no reaction to button presses — it might be in sleep mode (also known as Smart Start). Here's the User Manual. This feature activates automatically after 5 minutes of inactivity to sa

Can I use the GTR Charger for the Stoke X?

No — the GTR charger (4A) is not compatible with the Stoke X. Here’s a quick breakdown:. Works with:. • GTR Series 1. • GTR Series 2. • Onirique. • Stoke 1. • Stoke 2. Does not work with:. • Stoke X. Specifically designed for the larger battery and h

How do I use the Evolve Phaze Remote (Renegade / Diablo / Other Models)?

If you’re new to the Phaze remote or just need a refresher, we’ve got you covered. This remote is used on the Renegade, Renegade Diablo, Hadean, Diablo, Stoke X, and GTR Series 2 models. 🕹️ To learn how to use it — including how to pair it, switch m

Should I remove the tape or plastic wrap from the motors?

Yes — that clear tape or plastic you see around the motors is just factory packaging. It’s there to protect the motors during shipping and should be removed before you ride. If it’s still on, feel free to peel it off. If it came off while riding, no

Can the GT or GTX board use the Phaze remote?

Yes, the GT and GTX boards can use the Phaze remote, but only the Phaze WiFi version. If you have a GT or GTX and need a replacement remote, make sure you get the Phaze WiFi version, which was designed specifically to support older boards like the GT

How to do a Trigger Reset on the Phaze Remote

Steps:. Turn the remote on by pressing and holding the power button. Once it’s on, double tap the power button to open the menu. Use MODE 2 (bottom button) to scroll down, or MODE 1 (top button) to scroll up until you find ‘OPTIONS’ option. Press the

Which Travel Battery Fits My Board?

Travel batteries are a great option when flying with your board, but it’s important to select the correct one — the battery must match your board’s deck style and generation. Here’s a breakdown of the current options on our site:. 🔋 Available Travel

Battery Replacement for Gen 1 GT Carbon Series

If you have a Gen 1 GT Carbon board and the battery is bulging, no longer charging, or no longer functioning, it’s important to stop using the board immediately.These boards are only compatible with their original GT Series battery type. Newer platfo

How to update your Phaze remote for use with the Diablo Series board

If you’ve bought a Phaze remote from a third-party seller (like Electric Surf Co. or Last Mile NYC or Boosted etc) and your Diablo Carbon board won’t connect, it’s most likely due to outdated firmware on the remote. ⚠️ Important compatibility note. I

Does the board come to a complete stop going downhill?

If you’re testing your board on a hill and noticing that it still rolls a little even when holding full brake, this is completely normal. All of our boards are designed to slow you down with controlled resistance, but they won’t come to a full mechan

Which street gear comes with my board if I order a Street Setup?

When you order any Evolve board with a Street Setup, it comes standard with 38T drive gears. The 38T (38-tooth) gears are a great all-round option that balance speed and torque for everyday street riding. Want to customise your gearing?. You can upgr

WHEN a customer asks about customising their board or configuring a 2-in-1 board

Trigger examples: “Can I customise my board?” “Can I choose different wheels or tyres?” “Can I build my own setup for a 2-in-1?”WHEN a customer asks about customising their board or configuring a 2-in-1 boardIF the customer is ordering a 2-in-1 board

Can I get 6-inch All Terrain wheels when ordering a board?

When purchasing a new board with the All Terrain setup, it will come standard with 7-inch wheels. Unfortunately, 6-inch wheels are not an option at checkout. If you’re ordering a Diablo board, you can purchase a 6-inch wheel setup separately and fit

Which gears do I need for 105mm Orangatang Dad Bod wheels?

To run Orangatang 105mm Dad Bod wheels, you’ll need Kegel-style gears, which we stock. These gears have the same design as our standard Evolve gears but are made to fit the core of Kegel-style wheels like the Dad Bods. Kegel Gear size options:. 38T K

Do I need to unpair my old remote before pairing a new one?

Nope—you don’t need to unpair anything. When you buy a new remote (like the Phaze), pairing it to your board is quick and easy. The board will automatically connect to the new remote when you follow the steps below. Turn the board on. Turn on your ne

I need a replacement bolt for the bash guard

If you’re looking for a replacement bolt for your bash guard, you’ll need the:. ➡️ 14mm Countersunk Screw. Buy it here. This is the correct bolt used to secure the bash guard to your board. You can purchase it directly from our website by searching ‘

Which remote for the GTR Gen 1 Bamboo series?

The Evolve GTR Gen 1 Bamboo series is the GTR Series 1. The same if you have a Evolve GTR Gen 1 Carbon series. It's the Series 1. The boards use the Phaze remote.

I have broken my Deck - Hadean Bamboo - will a GTR Bamboo Deck work as a replacement?

No, the Hadean and GTR deck are not cross-compatible, as they have different mounting patterns for the components. Diablo decks, however, can be used as a replacement deck for your Hadean. They have the same bolt holes, and the Diablo deck is thicker

Could I transfer my Hadean bamboo setup to a Hadean Carbon

No, the battery enclosure and motor controller housing are totally different. It is not possible.

🤔 Can I use a Phaze remote with my GT board?

The good news is: Yes, GT boards are compatible with the Phaze WiFi remote (not the Bluetooth version). Make sure you get the Phaze WiFi remote, which is designed specifically for the older GT and GTX series boards. You can find it listed under remot

🔧 Will CNC Aluminium 66T Drive Gears work on my Hadean Carbon or Bamboo All Terrain?

Not without upgrades. Your Hadean Carbon or Bamboo All Terrain comes with SuperCarve 1 trucks, which are not compatible with the CNC Aluminium 66T Drive Gears. 🛠️ Why they don’t fit. The rear axle assembly on SuperCarve 2.0 trucks is completely diff

My board won’t turn on after long-term storage

If your board hasn’t been used in several months (or longer) and now won’t power on—even when plugged into the charger—it’s likely that the battery has dropped below safe operating voltage. Lithium-ion batteries naturally self-discharge over time, ev

When is your shop open?

TRADING HOURS: 9am - 4pm Monday to Friday (excluding Public Holidays)

💡 What lights are compatible with my board?

🔦 About board lighting. If you’re looking to add more front or rear lighting, especially for better visibility at night, we’ve got options. We recommend checking out our range of ShredLights—they’re bright, compact, and can be mounted to any Evolve

What’s needed for the fastest possible custom build? What belt, wheels, and gears?

If you’re chasing maximum top speed on your Evolve board, here’s the go-to setup we recommend for a custom street build:. Wheels:. 107mm ABEC F1 Street Wheels. (Large diameter = more roll, more speed). Gears:. 32T Street Drive Gears. (Smaller gear ra

🎮 Is my new Phaze remote ready to use straight out of the box?

Yes—100%. If you’ve just purchased a Phaze remote from our website, it’s ready to go straight out of the box. There’s no setup or configuration needed. Just turn on your board, power on the remote, and follow the pairing steps (usually just holding t

Will the vertical wall mount fit a renegade evolve board

No, the Vertical rack will not on the Renegade

I just bought the bmx. The screen seems to display mph instead kph. How to i change it to kph?

You’ll need to download the Bafang app called SwiftFlow. It has a green icon with an orange circle and a ‘B’ in the middle. Once downloaded, turn the bike on. Open the app, select your e-bike, and press Go. Tap the Bluetooth symbol in the top left co

🛠️ Which motor plate does the GT or GTX use?

The GT and GTX boards use the same 1500W motor plate as the GTR Series 1. So, if you’re looking for a replacement motor plate, you can safely order the GTR Series 1 – 1500W Motor Plate as a direct fit.

🛹 Can I use 97mm wheels on my Onirique?

No, 97mm wheels are not officially compatible with the Onirique. The Onirique is designed to run with 85mm wheels only, due to limited deck clearance. Fitting 97mm wheels can lead to deck bite, especially when carving. The wheel size exceeds the clea

📱 Trying to pair your iPhone (or Android) to your board but it asks for a code?

If you’re seeing a prompt asking for a Bluetooth code, here’s the reason:You’re likely trying to connect your board directly through your phone’s Bluetooth settings, which won’t work. Whether you’re using an iPhone or Android, do not search for your

What is the Fusion?

The Fusion is a board Born from Icons, Built for Everything. Dropping 22 July.

🛞 Are Evolve street wheels sold individually or as a set?

All Evolve street wheels are sold as a set of 4.When you add 1 item to your cart, you’re ordering 1 pack containing 4 wheels—enough for your full board. The Street Conversion Kit includes:. 4 wheels. 2 belts. 2 drive gears. 1 x pack of bearings. 2 x

🔦 Are ShredLights mounts compatible with Evolve boards?

Yes—ShredLights mounts are compatible with all Evolve boards, including the Diablo Carbon. You can attach them to the front or rear trucks using the appropriate ShredLights mounting brackets, which are designed to fit a wide range of e-skate setups.

Can I customise my Evolve board?

We know personal style matters—but when it comes to customisation, there are limits to what we can offer.✅ What you can customise:When ordering or building your board, you can choose from:Hub coloursWheel colours and stylesTruck colours (depending on

📏 What are the correct remote settings for my GTR Series 2 Carbon All Terrain?

If you’ve just received your GTR Series 2 Carbon All Terrain, the default setup includes:. 175mm (7-inch) All Terrain wheels. 66T drive gears. To ensure your remote reads speed and distance accurately, set it to:. ➡️ 175mm / 66T. If your remote is sh

🛠️ Only one motor is working and speed readings are erratic?

If your board is only running on one motor and your remote shows bouncing or inaccurate speed readings, this usually points to a motor or in a rare event a motor controller issue. One motor may have failed or become disconnected. The hall sensors in

⚠️ I updated my R2 remote and now it won’t turn on

If your R2 remote stopped working after a firmware update, there’s a strong chance the wrong firmware was installed. If you accidentally installed Phaze remote firmware onto your R2 remote (which is used for GTR Series 1, Stoke 1, and Onirique), it w

🔋 What maintenance does the battery need?

Great question—proper battery care can extend the life and performance of your board. We recommend watching our full video guide here:. ▶️ Battery Maintenance Tips – Evolve Skateboards. Charge your board at least once every 4–6 weeks if it’s not in u

Can I buy a blank Renegade deck?

Yes, you can. Please leave your name, mobile number, and delivery address, and our team will create the order for you.

🕹️ How to set a speed limiter on your Phaze remote

The Speed Limiter lets you cap the top speed of your board—perfect for learning, cruising, or just riding with a bit more control. Once set, your board won’t go faster than the limit you choose. Turn on your Phaze remote. Double-tap the power button

🔋 What’s the difference between 12s2p, 12s3p, and 12s4p batteries?

We offer three battery configurations in our newer boards: 12s2p, 12s3p, and 12s4p. Each has the same voltage (12s), but different capacity based on how many cells are connected in parallel (2p, 3p, or 4p). The more ‘p’, the more range—but also more

Board Compatibility Guide: Motors, Batteries & Motor Controllers

If you’re upgrading your board or replacing a part, it’s important to make sure everything is compatible. Not all motors, batteries, or motor controllers work across different boards. This guide breaks down which components match which boards. 1500W

🔋 What are the battery upgrade options for my Evolve Omakase eBoard?

The Evolve Omakase eBoard supports two battery options, both designed to fit the deck and electronics setup. 4.2Ah Stoke 2 Battery. Lighter and more compact. Best for short, agile rides. 6Ah Onirique Battery. Higher capacity = longer range. Ideal if

🐢 My GTX board is stuck in ECO mode and won’t go faster than 10mph

If your GTX board paired with a Phaze WiFi remote is stuck in ECO mode and tops out around 10mph (16kph), this is usually caused by one of three things:. 🔍 1. Speed limiter is active. Check if the Speed Limit is turned on in your remote settings:. D

🔄 Can I use my GTR wheels on the Fusion board?

Yes, with a few key upgrades. If you’re upgrading from a GTR Series 1 Bamboo or Carbon to the Fusion, you can reuse your current wheels, as long as they’re mounted on Surge hubs. But there are a few compatibility details to keep in mind. Wheels: Yes,

🔄 Do Evolve 2 in 1 boards come with both All Terrain and Street wheels?

Yes. Every Evolve 2 in 1 board includes both setups out of the box. Whether you’re buying a GTR Series, Fusion, or Diablo 2 in 1 (Carbon or Bamboo), your board will ship with:. All-Terrain wheels pre-installed. A complete Street Conversion Kit, packe

🔌 Will my GTR Carbon charger work on my Bamboo GTR?

Yes. All GTR Series boards—whether Carbon or Bamboo, and whether Series 1 or Series 2—use the same charger. GTR Series 1 (Carbon & Bamboo). GTR Series 2 (Carbon & Bamboo). All share the same charger and are interchangeable. The same charge port is al

Can you ride the Project BMX without a battery?

Yes, you can ride the Project BMX without a battery.

🛞 Can the Renegade Diablo run with 6” wheels?

Technically, yes, you can fit 6” wheels on the Renegade Diablo. However, there are a few things you need to be aware of before doing it. Reduced ground clearance compared to the stock 7” tyres. Higher chance of the deck edges biting the ground when c

💡 Will the SL-300+ Shred Lights work with my Evolve board?

Yes — the SL-300+ Shred Lights will work with any Evolve board, regardless of the model or firmware version. Shred Lights operate independently and do not connect to your board’s firmware, so they can be used on any setup. Simply mount them to your b

🛹 What size Street wheels can I use if my board came with All Terrain?

All of our boards that ship with All Terrain wheels (GTR Series, Hadean, Diablo, Fusion) can also run Street wheels. You’re not limited to a single size — here are the compatible options:. 85mm Orangatang Caguamas. 97mm Evolve Street Wheels. 105mm Or

🛹 Can the Renegade use Street wheels?

Technically, yes — the Renegade can be fitted with Street wheels since it uses the same gear and belt system as our other boards. However, we don’t recommend it. The Renegade is a purpose-built off-road board. Street wheels lower the ride height, red

🔧 How do I change the bushings on the Renegade?

The Renegade uses Channel trucks, which work a little differently from our SuperCarve trucks. Each truck has two “springs” with bushings seated inside. Here’s how you can replace them:. Locate the screws. Underneath each truck, you’ll see screws that

What motors are on the Onirique edition? What would be a good choice for replacement?

What motors are on the Onirique edition? What would be a good choice for replacement?. The Onirique uses 1500W motors and only 1500W motors can be used as replacement. The Onirique cannot be fitted with larger motors. For street wheels, only 85mm whe

🔩 Missing or loose screws on your Bash Guard?

If the fasteners on your Onirique (or any Evolve board with a bash guard) have come loose or gone missing, you can replace them easily — they’re not model-specific. All Force Bash Guards use the same screws, regardless of whether they’re fitted to an

What is Evolve Labs?

Evolve Labs is where our in-house team designs and builds custom boards that push the limits of what’s possible.It’s our creative space to experiment, innovate, and showcase new ideas in performance, design, and customisation.🛠️ What makes Evolve La

Can you fit 107mm or 105mm street wheels or All Terrain Wheels on the Stoke X?

The 107mm, 105mm street wheels are a little too big for the stoke x. We don't recommend more than 97mm for the clearance to the deck. While the Stoke X trucks can support All Terrain wheels, we don't reccomend this either.

Phaze remote would not calibrate due to the break button not responding

If your Phaze remote(Phaze Bluetooth or Phaze Wifi) is stuck in the calibration screen(when performing a trigger reset) and won’t register the brake trigger, it’s likely there’s an internal issue with the brake sensor.

My new Phaze remote doesn't pair with my board

Please make sure that you are trying to pair the correct Phaze remote with the board. GT and GTX boards use the Phaze Wifi remote and all other newer boards use the Bluetooth remote. If you accidentally purchased the wrong remote, it will not pair. T

Does Singapore have a distributor?

Singapore does not have a distributor. Reach out to Evolve Australia for orders to Singapore.

Need new screws, fasteners, nuts or bolts?

Need screws, fasteners, nuts or bolts?. You might need them for you Basg guard, battery case, or general replacements. This is the link where you will find them all: https://www.rideevolve.com/products/gt-spare-screw-set?_pos=1&_psq=hardware&_ss=e&_v

Whats the cheapest possible off road board we've?

GTR Bamboo All Terrain is the cheapest possible off-road board in the Evolve lineup.

🔧 What size Allen key do I need to remove the hubs on my wheels?

Whether you have Relay hubs (used on GTR Series 1) or Surge hubs (used on later models), both use the same size Allen key to remove the hub screws. You’ll need a 1/8" (one-eighth inch) Allen key. This is the standard size for removing the bolts that

🛹 Is the Fusion good for beginners?

Absolutely — the Fusion is a great board for beginners. It’s designed to be powerful, smooth, and confidence-inspiring, whether it’s your first electric skateboard or you’re a seasoned pro. • Easy learning curveThe Fusion has multiple speed modes — E

🐌 My board is really slow and won’t go faster than ~20 km/h / ~12 mph — what’s wrong?

If your board feels slow straight out of the box, or suddenly won’t go above 20 km/h (about 12 mph), it’s almost always because the Speed Limiter is turned on. All new Evolve boards ship with the speed limiter activated for safety. The good news? It

📡 GT / GTX board won’t pair with the remote (blue light flashing)

If your GT or GTX board turns on and the blue light flashes, that’s completely normal — this is how GT/GTX boards behave during pairing. If the board and remote are not pairing, here’s what to check. If you recently purchased a new remote, confirm th

🎄 Christmas delivery cut-off dates & holiday trading hours (USA)

Planning an order for Christmas? Below are the last order dates for the best chance of delivery before Christmas, along with our Christmas / New Year office hours. ⚠️ These dates are provided as a guide only. Courier delays during the holiday period

🛠️ What’s the difference between the original Evolve trucks, SuperCarve 1, and SuperCarve 2?

Over the years, Evolve has developed several truck designs, each improving on stability, control, and carving feel. Here’s a clear breakdown of the differences so you know what sets each one apart. These were used on earlier boards like the GT and GT

⚙️ Do the new 58T gears work on the GTR Series 2?

Yes, they can—but only with the correct hardware. The 58T drive gears are designed for SuperCarve 2 trucks. While the GTR Series 2 has the larger motors required to run 58T gearing, the gears will not work on the stock SuperCarve 1 setup. To use 58T

⚙️ What’s the difference between 58T and 66T gears?

The difference between 58T and 66T drive gears comes down to speed vs torque, and how the board feels under acceleration and braking. Higher top speed. Lower torque compared to larger gears. Best suited for riders chasing maximum speed on flatter ter

⚙️ What kind of gears does the GTR Series 2 have?

The GTR Series 2 comes standard with Surge gears, but it’s important to note that these are the original Surge gears, not the newer SuperCarve 2 Surge gears. The GTR Series 2 does not use SuperCarve 2 gears as standard. 66T CNC SuperCarve 2 gears wil

🔍 How do I tell if I have a GTR Series 1 or GTR Series 2?

We get this question a lot. Here’s how to quickly identify which GTR you have. Both Series 1 and Series 2 come in Bamboo and Carbon variants, so look for the differences below. Series 1 Bamboo. No “GTR Bamboo” logo near the rear of the deck. Series 2