Stoke Series 1 Troubleshoot
Stoke Series 1 - Board Doesn't Turn On or Switch Light Flashes
If your Stoke Series 1 isn’t turning on, or the power switch light is flashing, follow these steps to troubleshoot the issue. Before anything else, charge the board and see if it turns on. Loose connections can prevent the board from turning on. Ensu
Stoke Series 1 - Board Doesn't Charge
If your Stoke Series 1 isn’t charging, follow these steps to diagnose and resolve the issue. Before assuming the board has an issue, inspect the charger and charge port:. Your charger’s LED will indicate its status:. If possible, test your charger wi
Stoke Series 1 - Fluctuating Battery Percentage
If your battery percentage isn’t dropping in 1% increments, jumps up and down, or suddenly drops to 0%, here’s what you need to check. If the battery percentage drops in chunks (e.g., 80% to 60%) and doesn’t recover, this may indicate a deeper issue.
Stoke Series 1 - Odd Noises
Your board has multiple moving parts, and various noises can indicate different issues. Here’s how to identify and resolve them. A loose nut, bolt, or damaged bearing could be the cause. Try to pinpoint the source:. Usually caused by the driveline:.
Stoke Series 1 - Motor Concerns
If both motors do not work, but the remote and board are connected, check the Remote Concerns article. Check the hall sensors for debris by looking into the vents on the non-drive side of the motor. Locate the three sets of three pins (you may need t
Stoke Series 1 - Heat Protection
To prevent the electric system from overheating on your Stoke Series 1, built-in software reduces board performance when temperatures reach certain limits. This allows the system to cool down and prevents excessive stress on the components. If the bo
Stoke Series 1 - Not Getting Advertised Top Speed
If your board isn’t hitting its top speed, there are a few settings and factors to check before reaching out to support. If the speed metric (kph/mph) on your remote is yellow, this means the Speed Limit setting is enabled. Incorrect wheel settings w
Stoke Series 1 - Reduced Range
Many factors can affect overall range, including riding style, terrain, environment, ambient temperature, battery age, tyre pressure, and rider weight. If you've noticed a sharp decrease in range and don't believe it’s due to any of these factors, re
Stoke Series 1 - Remote Concerns
If you are having trouble connecting your remote, changing speed modes, turning the remote off, the board responding erratically or general connection concerns, it will most likely be remote related. Check the remote is in sound operating condition a
Stoke Series 1 - R2 Remote Won't Take/Hold Charge
Inspect the charge port on the remote. Ensure it is free from debris or damage. Try a different Micro USB charge cable and a different USB charge point to eliminate the charging source as a concern. If you have isolated the concern to the remote, it
Stoke Series 1 Troubleshoot
SkateboardBoard doesn't turn on or the switch light is flashingBoard doesn't chargeFluctuating battery percentageOdd noisesOne motor isn't working or works intermittentlyBoard drops to PRO mode and speed turns red on the remote / heat protectionBlue